are in Italics
Fish & Wildlife Mgmt.
Model Design & Building
Pulp and Paper
Reptile & Amphibian Study
Small Boat Sailing
Soil & Water
- Format four sheets of drawing paper (or two sheets of paper if you are completing
requirement 3) with proper borders and title blocks for your projects.
- Make a rough sketch of your project drawings to determine the correct size of paper to
- Using single-stroke vertical or slant Gothic lettering, fill in all important
information in the title block sections of the formatted paper.
Complete requirement 2 or 3 for your drawing projects.
- Prepare two of the following pencil drawings for reproduction, using two of the
formatted sheets of paper and being sure to fill in the title block information.
- Architectural: Make a rough sketch of a room. From it, make a finished scale floor plan.
Using conventional symbols, show all openings, equipment, lights, and safety devices. Use
an architectural scale size.
- Mechanical: Make a scale drawing of some piece of craft work or interesting object. Use
the orthographic projection technique to show at least three views. Use dimension lines to
show the actual size.
- Electrical: Draw a simple schematic of a radio or electronic circuit. Properly print a
bill of materials of the major electronic parts of the radio or circuit. Use standard
drawing symbols for the electronic components.
- Using a CAD (computer-aided drafting) system, prepare and plot one of the drawings in
requirements 2a, 2b, or 2c. Create the format (border and title block) on the computer
before starting the drawing.
- Using a formatted sheet of paper, prepare an isometric drawing of something not drawn in
requirement 2 or 3. On the drawing, list which instruments you used.
- Lettering: Using single-stroke vertical or slant Gothic lettering, describe in forty
words or less why CAD is used in a particular industry (aerospace, electronics,
architectural, or other). Use the 8½-by-11-inch formatted sheet.
- Describe the three most common methods of reproducing pencil drawings. Describe one
method of reproducing a computer drawing. Make copies of one of your drawings using one of